What is "Fixed Frequency" and what are the frequencies I can use?

Submit a request
Avatar
Idan Pearl

By default, CONNEX uses Automatic Frequency Selection (AFS), which fully complies with regulations and automatically selects the best free frequency available. The Fixed Frequency option allows the operator to manually select a specific fixed frequency to work on. 

The Fixed Frequency feature is available in CONNEX devices using firmware version 3.0 and above. The feature is not supported in CONNEX Mini devices.

Note, that if a user has CONNEX or CONNEX Fusion ground unit linked with CONNEX Mini air unit (available from version 3.2 and above), manual frequency selection is not available. 

In addition, the availability of the Fixed Frequency option varies according to the regional settings selected. Fixed Frequency is not available when CONNEX is set to Indoor settings in the EU region or to Outdoor settings in the Japan region.

Available frequencies per region are listed in the following table:

 

Korea Out Korea In Australia Canada Out Canada In Japan Out Japan In China In China Out Euro In Euro A2G US
5745 5180 5745 5745 5180   5180 5180 5745   5745 5180
5765 5200 5765 5765 5200   5200 5200 5765   5765 5200
5785 5220 5785 5785 5220   5220 5220 5785   5785 5220
5805 5240 5805 5805 5240   5240 5240 5805   5805 5240
  5745 5825   5745     5745 5825   5825 5745
  5765     5765     5765     5845 5765
  5785     5785     5785       5785
  5805     5805     5805       5805
              5825       5825

Note: While working in Fixed Frequency mode, the system will NOT automatically switch to an alternative available channel in the event of interference.

Fixed Frequency is enabled in the Link Configuration tab of the Management tool, by selecting the required frequency from the list:

 

Was this article helpful?
0 out of 0 found this helpful

Comments