How To Connect CONNEX Air Unit to DJI A2 flight controller

Submit a request
Avatar
Itai Dekel

Important: relevant for FW version 2.0.11 and above.

In order to connect CONNEX Air Unit to DJI A2 flight controller, you should use the CAN-BUS/S.BUS cable (description here).

Connect the 5 pins connector to the S.BUS/CAN-BUS port in the CONNEX Air Unit and the CAN-BUS connector to Can 1 port in the A2 flight controller (see diagram below):

Note: A2 diagram was taken from DJI official website.

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments