Alert and System Messages

Submit a request
Netanel Goldberg

The tables below describe messages that may appear on the monitor connected to the Ground Unit HDMI port.

Alert Messages – Overlaid on Video During Link

These alert messages may be displayed on top of the live video:



Out of Range

A link still exists, but the video signal has been lost. This message is displayed regardless of the OSD button position.
When the Air Unit is within range, the video signal is automatically reacquired.

See video

Approached Range Limit

This alert is displayed for 30 seconds, from the moment the Air Unit has been detected as out of range until the Out of Range warning is displayed. The message is a warning that the video signal is about to be lost. We recommend flying the drone back within the range of the Ground Unit. 
This message is displayed only if the OSD button enables OSD display.

See video

Video Signal Not Detected

A link has been established between the Air Unit and the Ground Unit, but no video signal has been detected. This message is displayed regardless of the OSD button position.


System Messages – No Link

These system messages may be displayed when no live video is displayed:



Searching for Air Unit

This message is displayed until a link is established. This may occur when the Air Unit is out of range or unavailable, or when the Ground Unit has been removed from its list of paired devices.

Pairing in Progress

This message is displayed while the Air Unit is pairing with a Ground Unit.

For a detailed description of the pairing process, click here.

Was this article helpful?
0 out of 0 found this helpful