Unregistering Ground Units (Windows / MAC)

Submit a request
Avatar
Netanel Goldberg

There are two options for unregistering Ground Unit(s) from an Air Unit, as described in the procedures below:

  • Unregistering one device at a time
  • Unregistering all devices simultaneously

To view a video about unregistering Ground Units, click here.

To unregister a single device:

  1. Make sure that the computer on which the CONNEX Management application is installed is connected to the Internet and is connected to the Air Unit via a Micro USB cable.
  2. Launch the CONNEX Management tool by double-clicking its desktop icon.
  3. Click the Link Configuration tab.
    The lower right portion of the window displays a list of Ground Units registered with the Air Unit, as shown here:

  4.  To unregister a Ground Unit, click on the X button in the relevant row (marked in RED in the image above).

To unregister all Ground Units:

  1. Make sure that the computer on which the CONNEX Management application is installed is connected to the Internet and is connected to the Air Unit via a Micro USB cable.
  2. Launch the CONNEX Management application by double-clicking its desktop icon.
  3. Click the Link Configuration tab.
    The lower right portion of the window displays a list of Ground Units registered with the Air Unit, as shown here:

  4. Click the Unregister all receivers button (marked in RED in the image above).

For information about registering Ground Units, refer to Multicasting to Multiple Ground Units.

Was this article helpful?
0 out of 0 found this helpful

Comments