How do I change my OSD details?
Submit a request
Setting OSD Overlays
This section reviews the overlay displayed on top of the video image. The overlay is selected for the following communication modes:
My drone – when connected to the paired drone
Other drone – when connected to other drones as a viewer
The OSD menu also allows you to select the color of the telemetry information displayed on the OSD. For details, see Setting Telemetry Color.
Selecting My Drone Overlay
To set the viewing mode for the paired drone:
Selecting Viewer Overlay
To set the viewing mode when connected as a viewer:
Detailed Overlay
The Detailed overlay displays the following information on top of the live video:
Transmitter name (1)
-
Signal level (2) – there are three levels:
-
- best signal
-
- signal is weakening
-
- it is recommended to bring the drone closer to the receiver
-
Frequency mode (3)
Battery voltage (4) – blinks and turns red if the measured voltage is below the predefined threshold (see Setting Power Alert Threshold).
-
Flight duration (5) – counts the flight time in seconds. Count start time depends on the following:
When the HD transmitter telemetry port is connected to the flight controller, time starts counting when the drone is armed.
When the telemetry port is not connected, time starts counting once the drone is powered on.
![]() |
Race Overlay
The Race overlay displays the following information on top of the live video:
Flight duration (1)
Battery voltage (2)
![]() |
Viewer Overlay
The Viewer overlay displays the following information on top of the live video:
Transmitter name (1)
ProSight logo (2)
![]() |
No Overlay
This selection displays no overlay on top of the live video.
Setting Telemetry Color
To set the color of the telemetry information displayed on the OSD:
-
Select Main menu > Setup > OSD > Telemetry Color.
-
Select one of the following colors:
White
Black
Green
Tip
Tip: Select Back to return to the Main menu .