ProSight "Tip of the day"

Submit a request
Avatar
Shahar Keren

Hi HD Pilots,

If you are using ProSight Bands (A,B,C,D), please wait up to 2 minutes before flying, since the ProSight has a scanning system and it is highly recommended not to fly before the scan is done. (See attached photo).

______________________________________________________________________________________

Hi HD Pilots,

You can download 3D files of the Camera cover, Antenna base, TX board dimensions.

_______________________________________________________________________________________

Hi HD Pilots,

As the HD Transmitter tends to heat up significantly while transmitting (That's Normal), we recommend to keep the unit well ventilated in order to assist with heat distribution.

_______________________________________________________________________________________

Hi HD Pilots,

If you want to replace the Camera Lens, we recommend using the original Focus Locking Ring to set the focus with the new lens. Once you get the optimal focus set, please lock the lens with the Focus Locking Ring (As in the picture).

_______________________________________________________________________________________

Hi HD Pilots,

When setting the ProSight HD transmitter on the drone, we recommend that you keep the Micro USB port accessible, for pairing it with the HD Receiver (via OTG USB cable) and PC configuration.

_______________________________________________________________________________________

Hi HD Pilots,

You may consider to use CONNEX ProSight RMT Mobile Application (iOS and Android) in order to connect to your HD Receiver via Bluetooth. You can change its name, select frequencies rapidly and more.

The default pin code for pairing is 000000, and it can be changed on the HD Receiver OSD Menu. Go to "Setup -> Bluetooth -> Reset pairing code. The system will generate a new code for you.

_______________________________________________________________________________________

Hi HD Pilots,

In order to avoid any physical damage to the Power-In Connector of the HD Transmitter (GH type 4-pin JST) while unplugging it, please press the peg tail and unplug it carefully.

_______________________________________________________________________________________

Hi HD Pilots,

In order to record your flights using ProSight, HDMI capture recorders can be used.

Here in CONNEX labs we use the recorder from this seller , but any recorder can do.

This above recorder has no latency we were able to notice or measure and it also has a HDMI in connector and a HDMI out connector, so it can be placed in between the HD receiver and your goggles.

_______________________________________________________________________________________

Hi HD Pilots,

The PWR OUT connector on the ProSight HD Transmitter is designed for future ProSight accessories and devices.

It must not be used to power any non-ProSight product.

Trying to power other devices using the PWR OUT connector might damage the ProSight HD Transmitter or even fry it.

_______________________________________________________________________________________

Hi HD Pilots,

You can change your ProSight HD Transmitter user name using the ProSight PC application.

To download the application, use the links in the Software Update Tool  article.

To change the ProSight device name, click on the edit button in the application

_______________________________________________________________________________________

Hi HD Pilots,

In Some cases, high vibration at the end of range of the throttle, may cause TX interference. we recommend to dampen the Tx mounting to the frame of the drone, to avoid this.

_______________________________________________________________________________________

Hi HD Pilots,

When installing the HD camera, it is recommended to make sure you dampen the connection between the Cam and the frame.

A rigid connection could cause what is known as "Jello" - which is a blurry image - originated by the frame vibrations resonating the camera.

Also, make sure the HD cam is not touching the frame (besides the dampers connection ..). we strongly recommend to use the cam silicon protector.

________________________________________________________________________________________

Hi HD pilots,

When flying a few ProSight systems together (2 or more), we recommend to use the ProSight

FIXED FREQUENCY rather than AUTO mode.

Happy Flying

Was this article helpful?
0 out of 0 found this helpful

Comments