What is "Fixed Frequency" and what are the frequencies I can use?

Submit a request
Avatar
Shahar Keren

By default, CONNEX uses Automatic Frequency Selection (AFS), which fully complies with regulations and automatically selects the best free frequency available. The Fixed Frequency option allows the operator to manually select a specific fixed frequency to work on.

The Fixed Frequency feature is available in CONNEX devices using firmware version 3.0 and above. The feature is not supported in CONNEX Mini devices.

In addition, the availability of the Fixed Frequency option varies according to the regional settings selected. Fixed Frequency is not available when CONNEX is set to Indoor settings in the EU region or to Outdoor settings in the Japan region.

Available frequencies per region are listed in the following table:

Korea Out

Korea In

Australia

Canada Out

Canada In

Japan Out

Japan In

China In

China Out

Euro In

Euro A2G

US

5745

5180

5745

5745

5180

5180

5180

5745

5745

5180

5765

5200

5765

5765

5200

5200

5200

5765

5765

5200

5785

5220

5785

5785

5220

5220

5220

5785

5785

5220

5805

5240

5805

5805

5240

5240

5240

5805

5805

5240

5745

5825

5745

5745

5825

5825

5745

5765

5765

5765

5845

5765

5785

5785

5785

5785

5805

5805

5805

5805

5825

5825

Note: While working in Fixed Frequency mode, the system will NOT automatically switch to an alternative available channel in the event of interference.

Fixed Frequency is enabled in the Link Configuration tab of the Management tool, by selecting the required frequency from the list:

Was this article helpful?
0 out of 0 found this helpful

Comments