MavLink PIn-out and Cable

Submit a request
  1. CONNEX Support
  2. CONNEX
  3. Operational FAQ
Avatar
Permanently deleted user

This article describes the pin-out of the MavLink cable.

The wiring is as follows:

Red wire-Tx (CONNEX transmitting)

Black wire-Rx (CONNEX receiving)

Brown wire-GND

Note

Note: In order to connect the CONNEX unit to another unit, there must be a cross between the Tx and the Rx of the other unit (i.e., the Tx of the CONNEX must be connected to the Rx of the other unit).

Was this article helpful?
0 out of 1 found this helpful

Comments