Mounting the Air Unit Antenna Accessories (CONNEX)

Submit a request
Avatar
Shahar Keren

The Air Unit antenna mounting accessories provide a variety of options for attaching the two provided flat cable antennas to the drone so that they are pointing the towards the ground (vertical).

Figure 10. Air Unit Cable Antenna Mounting Accessory - with Flat Cable Antenna - Box 2

Air Unit Cable Antenna Mounting Accessory - with Flat Cable Antenna - Box 2

Key

Description

1

Antenna

2

Antenna Cable

3

Antenna Clamp

4

Antenna Mounting Screw

5

Antenna Mounting Piece

Figure 11. Front of the Antenna Mount Piece

Front of the Antenna Mount Piece

Key

Description

1

Drone leg/bar is here

Figure 12. Back of the Antenna Mount Piece

Back of the Antenna Mount Piece

Key

Description

1 + 2

Plastic ties can be threaded through here to attach this to the drone

The Antenna Clamp attaches to the rotary on the Antenna Mounting Piece (shown above) using the provided screw. The Antenna Clamp has two holes through which you can insert the screw to attach it to the Antenna Mounting Piece according to the direction you would like the antenna to point. Once the Antenna Clamp is connected to the Antenna Mounting Piece, you can rotate it in the direction that you require the antenna to point, as shown below:

Figure 13. Rotating the Antenna Clamp around the Antenna Mounting Piece

Rotating the Antenna Clamp around the Antenna Mounting Piece
Rotating the Antenna Clamp around the Antenna Mounting Piece

Was this article helpful?
0 out of 0 found this helpful

Comments